www.wihatools.com wiha quality tools germany 95 warning! insulated tools are not intended for use on live or energized circuits. always disconnect and de-energize all equipment & circuits. never! work on live or energized circuits or equipment. 201 inch open-ended spanners, with insulated handle insulation according to vde specification 0680 and en/iec 60900, din 7446, up to 1000 volt. individually tested. chrome-vanadium steel, hardened. angled 15 o . item oal oal no. inch mm inch lbs. pkg. 201 33 5/16 100 3.9 .05 1 201 35 3/8 105 4.1 .07 1 201 36 7/16 117 4.6 .09 1 201 37 1/2 140 5.5 .15 1 201 38 9/16 146 5.7 .15 1 201 40 5/8 158 6.2 .20 1 201 41 11/16 165 6.5 .23 1 201 42 3/4 178 7.0 .33 1 201 44 13/16 191 7.5 .42 1 201 45 7/8 192 7.6 .44 1 201 46 15/16 201 7.9 .51 1 201 47 1 213 8.4 .61 1 201 48 1-1/16 233 9.2 .79 1 201 49 1-1/8 233 9.2 .77 1 * lengths are +/- 5% due to coating process wiha insulated open-ended spanners 1000volt 201 90 set 14 pcs. insulated inch open end insulated spanners item oal oal no. inch inch inch inch lbs. 201 90 201 33 5/16 3.9 201 42 3/4 7.0 3.0 201 35 3/8 4.1 201 44 13/16 7.5 201 36 7/16 4.6 201 45 7/8 7.6 201 37 1/2 5.5 201 46 15/16 7.9 201 38 9/16 5.7 201 47 1 8.4 201 40 5/8 6.2 201 48 1-1/16 9.2 201 41 11/16 6.5 201 49 1-1/8 9.1 1000volt steel forged from chrome vanadium, meets - din 3110 angled 15 o insulation high visibility, grip is double coated insulation test standards: insulation according to astm f-1505-01, en/iec 60900, vde 0680, din 7446 each tool individually tested to 10,000 volts and certified to 1000 volt ac or 1500 volt dc 1000v 201 92 set 8 pcs. insulated inch open end insulated spanners item oal oal no. inch inch inch inch lbs. 201 92 201 33 5/16 3.9 201 38 9/16 5.7 1.4 201 35 3/8 4.1 201 40 5/8 6.2 201 36 7/16 4.6 201 41 11/16 6.5 201 37 1/2 5.5 201 42 3/4 7.0 1000volt use & care guide for insulated tools: store tools to minimize risk of damage to insulation, always wear approved eye protection, inspect insulation prior to each use of any insulated tool. use insulated tools where the ambient temperature is between -20 to +70 o c. have a qualified safety technician visually inspect insulation on tools annually for safe use. new from wiha go to image index go to numerical index i n d e x shop shop shop previous next
|
